MAPAN

MAPAN — Journal
of Metrology Society of India

VOLUME CONTENTS
Volume No. - 23

Number 1: January - March 2008

Comparison of Argon Triple Point between NIS-Egypt and LNE-INM/CNAM-France M.G. Ahmed, K. Ali and Y. Hermier	3
Proficiency Testing for Surface Roughness Standard and Groove Depth Standard Arif Sanjid M., K P. Chuadhary and R.P. Singhal	13
Mixed Flow Relative Humidity Generator Hari Kishan and Bhikham Singh	21
Dissemination of Traceability in Chemistry to the Field Laboratories Laly Samuel and Andrew Tromans	25
Complete Characterization of a Low Thermal Scanner for Automatic Voltage Measurement Shiv Kumar Jaiswal	31
Measurement of Cutting Tool Condition by Surface Texture Analysis Based on Image Amplitude Parameters of Machined Surfaces-an Experimental Approach B.S. Prasad and M.M.M. Sarcar	39
Calibration Technique of a Set of Weights using one Reference Standard Goutam Mandal and Tripurari Lal	55
Instruction to Authors	60

Number 2: April - June 2008

Trend Analysis of Total Column Ozone over New Delhi, India S.L. Jain, Pavan S. Kulkarni, Sachin D. Ghude, Suraj D. Polade, B.C. Arya, P.K. Dubey and Shahnawaz	63
Study of the Long Term Performance on the Calibration Data of the Coaxial Thermistor Mounts up to 18 GHz Saood Ahmad, V.K. Rustagi, A.K. Govil, Bijendra Pal and P.C. Kothari	71
Evaluation of Interlaboratory Performance through Proficiency Testing using Pressure Dial Gauge in the Hydraulic Pressure Measurement up to 70 MPa Sanjay Yadav, Om Prakash, V. K. Gupta, B.V. Kumaraswamy and A. K. Bandyopadhyay	79
Use of an Alternative Probe for Improving Flue Gas Collection for Estimation of Hg T.B. Das, Rupa Das, A.K. Gangopadhyay and B.Ghosh	101
Preparation of Metal Standard Solution for Chemical Analysis of Fe, Cu, Cd, Hg and Pb Nuryatini and Sumardi	107
Calibration of Special Relative Humidity and Temperature (RHT) Sensors and Evaluation and Expression of Uncertainty in the Measurement Bhikham Singh, Hari Kishan and Y. P. Singh	115
List of Reviewers - 2007	122
Instruction to Authors	126

Number 3: July - September 2008

Preface	129
Redefining the Kilogram: How and Why? Richard S. Davis	131
Re-establishment of National Standards of Mass at NPL India Tripurari Lal, Goutam Mandal and C.K. Gopan	139
Mass Change of Stainless Steel Kilogram Standards at NMIA Kitty Fen	159
Definition of a New Metallic Alloy for the Realisation of Secondary Reference Mass Standards P.A. Meury and R. Molins	165
Comparative Studies on Zirconia Ceramics as a Material for Mass Standards Anil Govindan, Tripurari Lal and Anand Singh	173
Nano-Technology for Detection of Small Mass Difference S.V. Gupta	177
Instruction to Authors	193