MAPAN — Journal of Metrology Society of India

VOLUME CONTENTS

(Volume 20, January - December, 2005)

 Number 1, January - March 2005  

Preface  3
Guidelines for the Evaluation of the Uncertainty of Hardness Measurements 
 K. Herrmann		 5
State of the Art of the Conventional Hardness Measuring Methods : Rockwell, Brinell and Vickers 
 Samuel Low		 15
Dynamic Hardness Measurements 
 M. Kompatscher		 25
Hardness and Microstructure Studies of Standard Hardness Blocks 
 S.S.K. Titus, S.K. Jain, Anil Kumar and K.K. Jain		 37
Development of the Instrumented Indentation Test 
 Christian Ullner		 43
Review of Hardness Measurement Methods for Rubber and Plastics 
 Anton Štibler		 53
Requirements for the Accreditation of Hardness Testing Laboratories 
 T. Polzin		 63
Calibration of Electromechanical Type Direct Pressure Indicating Devices and Evaluation of Associated Uncertainties
 Sanjay Yadav and A.K. Bandyopadhyay		 71
Fortysecond List of Fellows, Members and Company Members  92
Form IV  94

Number 2, April - June 2005

   Dimensional Metrology

Preface  97
Interferometric Length Measurement 
 Andrew Yacoot, Mike Downes and Jens Flügge		 99
Product Surfaces in Precision Engineering, Microengineering and Nanotechnology 
 L. De Chiffre, H. Kunzmann, G.N. Peggs and D.A. Lucca		 115
Nano- and Micrometrology - State-of-the-Art and Future Challenges 
 Günter Wilkening and Harald Bosse		 125
Coordinate Metrology - Evaluation of Task Specific Uncertainties by Simulation 
 Franz Wäldele, Heinrich Schwenke and Christian Keck		 153

  Temperature Metrology

Calibration of Contact Thermometers above the Triple Point of Water at PTB
 Steffen Rudtsch, Erich Tegeler and Joachim Fischer		 165
Traceability and Metrological Infrastructure for Industrial Temperature Measurements in Germany 
 Sven Friederici and Erich Tegeler		 171
Advances in High-Temperature Standards above 1000°C 
 Yoshiro Yamada		 183
New High-Temperature Variable-Temperature and Fixed-Point Blackbodies for Precision 
Measurements in Radiation Thermometry and Radiometry
 V.I. Sapritsky, B.B. Khlevnoy, S.A. Ogarev, M.L. Samoylov, V.I. Shapoval and M.K. Sakharov		 193
Fortythird List of Members, Associate Members and Company Members  205

  Number 3, July - September 2005

Preface  211
Multicomponent Force Sensors 
 C. Ferrero 		213
Build-Up Force-Measuring System and its Applications 
 Yon-Kyu Park and Dae-Im Kang 		223
Long-Term Observation of Force Transfer Transducers as a Tool to Confirm the Measurement 
Capability of Force Standard Machines
 Aimo Pusa 		231
Force Measuring Facility from the Range of 1 mN to 10 N 
 Stefan Niehe 		239
Realization of Force Scale upto 50 kN through Dead Weight Force Machines at NPL, India 
 Kamlesh K. Jain, S.K. Jain, J.K. Dhawan and Anil Kumar 		249
Microsensor for Stress Surveillance in Building Structures 
 F. Tegtmeier 		259
Fortyfourth List of Fellows, Members and Associate Members  269

  Number 4, October - December 2005

Reference Blocks Development for Ultrasonic Thickness Gauge Calibration 
 M. El-Gazery and A. Amer 		273
Refining the Geostationary Satellite Orbit Determination Using Multi-station 
INSAT STFS Observations
 A. Sen Gupta and A. K. Hanjura 		283
Evaluation of Proficiency Tests by the Use of Reference Value Based on the CMCs of an NMI 
 Yoshito Mitani, Judith Velina Lara, Ma. del Rocio Arvizu and Alejandro Perez 		291
Interlaboratory Comparison in the Pressure Range 7 - 70 MPa Using Digital Pressure Calibrator 
 Sanjay Yadav and A. K. Bandyopadhyay 		297
Statistical Model to Find Accuracy of Test and Measuring Instruments when it is not Available/Given : Solution of a Quality Problem in Calibration
 O.P. Kapoor 		311
Fortyfifth List of Members  319
Volume Contents  320
Author Index  323